Administrators, writer
2,795
edits
Changes
Jump to navigation
Jump to search
Line 324:
Line 324: − +
Modeling Guide for 3D Objects - Part 2: Modeling of Buildings (LoD1, LoD2, LoD3) (view source)
Revision as of 09:43, 13 January 2014
, 09:43, 13 January 2014→Overhanging Building Elements
=== <span id="AuskragendeBauelemente">Overhanging Building Elements</span> ===
=== <span id="AuskragendeBauelemente">Overhanging Building Elements</span> ===
Overhanging or projecting building elements are defined as '''parts''' of roofs, walls etc, which should '''not be considered in the volume calculation of the building'''. Overhanging or projecting building elements are modeled as follows:
Overhanging or projecting building elements are defined as '''parts''' of roofs, walls etc, which should '''not be considered in the volume calculation of the building'''. Overhanging or projecting building elements are modeled as follows:
* as surface element(s) always separated from the volume-forming building element (see '''Figure A''')
* always as from the volume-forming building element separated surface element(s) (see '''Figure A''')
* always as a surface element, if the thickness of the building element is less than 0.5 m (see '''Figure B''')
* always as a surface element, if the thickness of the building element is less than 0.5 m (see '''Figure B''')
* always as a solid element, if the thickness of the building element is greater than 0.5 m (see '''Figure B''')
* always as a solid element, if the thickness of the building element is greater than 0.5 m (see '''Figure B''')