writer
465
edits
Changes
Jump to navigation
Jump to search
Line 843:
Line 843: − +
Modeling Guide for 3D Objects - Part 2: Modeling of Buildings (LoD1, LoD2, LoD3) (view source)
Revision as of 23:56, 4 December 2013
, 23:56, 4 December 2013→Definition
** Building parts may have different '''building attributes''' ( e.g. function, roof type ),
** Building parts may have different '''building attributes''' ( e.g. function, roof type ),
** Building parts may have a address that '''differs''' from the address of the building,
** Building parts may have a address that '''differs''' from the address of the building,
** The geometry of building parts (''bldg:BuildingParts'') must be modeled in a way that both the '''volume''' and the '''surfaces''' of the boundary surfaces ( wall surfaces, roof surfaces and ground surfaces ) correspond to the real conditions ([[#BuildingPart/Geometrie|see chapter Gebäudeteil/Geometrie]]),
** The geometry of building parts (''bldg:BuildingParts'') must be modeled in a way that both the '''volume''' and the '''surfaces''' of the boundary surfaces ( wall surfaces, roof surfaces and ground surfaces ) correspond to the real conditions ([[#BuildingPart/Geometry|see chapter Building Part/Geometry]]),
** If a building part is emphasized as the '''main part of the building''', its semantics and geometry can be modeled in the parent building,
** If a building part is emphasized as the '''main part of the building''', its semantics and geometry can be modeled in the parent building,
** Building parts will not be subdivided into further building parts.
** Building parts will not be subdivided into further building parts.